ALL ABOUT POLYTECHNIC IN KARNATAKA
Polytechnic Admission is going on for 2014, so if you are interested in getting admission in polytechnic courses in Karnataka (Bangalore) hurry up as the number of seats is very less for non-Karnataka students. (Very Less Cost)
Types of Polytechnic:
Polytechnic in India are divided Into different types such has private polytechnic, government polytechnics and women polytechnic and so on.. Depending upon the convenience one go for a part time course or full time course of diploma/ graduation...The subjects taught in polytechnic institution are vast such as computer engineering, chemical engineering, automobile engineering, fashion designing, mass communication, interior decoration... the courses provided by the polytechnic institution are never ending and goes on and on...
What is better?
Two years of higher secondary education followed by four years of engineering programme or three years of engineering education after three years of study in a polytechnic college.
There are definite advantages in pursuing engineering programmes after polytechnic education, according to heads of polytechnic colleges. Not only do the students get job-ready at minimal expenditure, they also enjoy the comfort of exercising the options to pursue B Tech /B.E. in engineering colleges through lateral entry or take up part-time B.E. programmes offered through technical universities while in jobs.
In fact, the trend of Class X students switching over to polytechnic education with the idea of securing admission in engineering colleges through lateral entry has been catching up in the recent years. At least 25 per cent of students join polytechnics with the idea of studying further in engineering colleges.
# It is recommended to go for higher studies after polytechnic and not opting for jobs.
# Studying B.Tech is the best available option for you.
# For this student has to qualify the LEET (lateral entry entrance test) of the concerned university.
# The course duration will be of 3 years. That means student will start your B.tech from the 2nd year
# There are a lot of public and private sector jobs after your diploma.
Polytechnic Admission is going on for 2014, so if you are interested in getting admission in polytechnic courses in Karnataka (Bangalore) hurry up as the number of seats is very less for non-Karnataka students. (Very Less Cost)
Types of Polytechnic:
Polytechnic in India are divided Into different types such has private polytechnic, government polytechnics and women polytechnic and so on.. Depending upon the convenience one go for a part time course or full time course of diploma/ graduation...The subjects taught in polytechnic institution are vast such as computer engineering, chemical engineering, automobile engineering, fashion designing, mass communication, interior decoration... the courses provided by the polytechnic institution are never ending and goes on and on...
What is better?
Two years of higher secondary education followed by four years of engineering programme or three years of engineering education after three years of study in a polytechnic college.
There are definite advantages in pursuing engineering programmes after polytechnic education, according to heads of polytechnic colleges. Not only do the students get job-ready at minimal expenditure, they also enjoy the comfort of exercising the options to pursue B Tech /B.E. in engineering colleges through lateral entry or take up part-time B.E. programmes offered through technical universities while in jobs.
In fact, the trend of Class X students switching over to polytechnic education with the idea of securing admission in engineering colleges through lateral entry has been catching up in the recent years. At least 25 per cent of students join polytechnics with the idea of studying further in engineering colleges.
# It is recommended to go for higher studies after polytechnic and not opting for jobs.
# Studying B.Tech is the best available option for you.
# For this student has to qualify the LEET (lateral entry entrance test) of the concerned university.
# The course duration will be of 3 years. That means student will start your B.tech from the 2nd year
# There are a lot of public and private sector jobs after your diploma.
Recognization & Approval Authority
These courses are recognized by the highest technical board in the State viz., The Directorate of Technical Education, Government of Karnataka, and approved by the AICTE, New Delhi. The time duration of the courses is three years i.e. 6 semesters.
Twenty percent of the total seats are opened to the deserving students hailing from other states (Out side Karnataka)
Diploma in Engineering
Duration: 3 Years
Eligibility: Pass in SSLC / 10th or equivalent examinations where in the student should have studied Mathematics and Science.
KARNATAKA
Directorate of Technical Education (DTE)
Since more number of Polytechnics and Technical degree colleges are increased, the new department called "Technical Education Department" is come into existence in 1959. Some of the technical skilled educational institutions are started before Independence (since 1943), by name "Occupational Institutes". Then later, these are renamed as "Polytechnics"(multiple technical skills/many technical skills). All these Polytechnics were working under "Public Instruction Department”, since before independence to till 1959.
The state government has increased the intake through lateral entry to engineering undergraduate courses from 10% to 20%
from academic year 2011-12. According to technical department officials, from 2011-12 at least 16,000 students will be allowed to get engineering seats through lateral entry.
These courses are recognized by the highest technical board in the State viz., The Directorate of Technical Education, Government of Karnataka, and approved by the AICTE, New Delhi. The time duration of the courses is three years i.e. 6 semesters.
Twenty percent of the total seats are opened to the deserving students hailing from other states (Out side Karnataka)
Diploma in Engineering
Duration: 3 Years
Eligibility: Pass in SSLC / 10th or equivalent examinations where in the student should have studied Mathematics and Science.
KARNATAKA
Directorate of Technical Education (DTE)
Since more number of Polytechnics and Technical degree colleges are increased, the new department called "Technical Education Department" is come into existence in 1959. Some of the technical skilled educational institutions are started before Independence (since 1943), by name "Occupational Institutes". Then later, these are renamed as "Polytechnics"(multiple technical skills/many technical skills). All these Polytechnics were working under "Public Instruction Department”, since before independence to till 1959.
The state government has increased the intake through lateral entry to engineering undergraduate courses from 10% to 20%
from academic year 2011-12. According to technical department officials, from 2011-12 at least 16,000 students will be allowed to get engineering seats through lateral entry.
DIPLOMA IN ENGINEERING
ELIGIBILITY
ADMISSION PROCEDURE
Application in the prescribed form for admission should reach the admission office within the date prescribed by the Directorate of Technical Education, accompanied by the following:
1. Original + 2 Xerox copies of 10th standard Marks Card
2. Original Transfer Certificate + 2 photo copies.
3. Five Years’ Study Certificate + 2 photo copies .in case of Karnataka Students
4. Eligibility Certificate in case of all Non-Karnataka Students
5. Eligibility Certificate only in case of Karnataka students who have passed CBSE or ICSE examinations.
6. Latest photographs - 05 Nos.
They must have obtained the “ELIGIBILITY CERIFICATE” before seeking admission, by applying to the SECRETORY BOARD OF TECHNICAL EDUCATION, III floor Directorate of Technical Education Building, Palace Road, Bangalore-560001.
Enclosing following documents. Our institution will assist them in procuring the eligibility certificate.
1. ORIGINAL marks card of qualifying examination (equivalent to the S.S.L.C. examination Karnataka) should be produced.
2. The amount of Rs. 500/- should be remitted in treasury under the head of account 0202,EDUACATION SPORTS ARTS & CULTURE, 02 TECHNICAL EDUCATION INSTITUTE AND OTHER FEES, 01 BOARD OF TECHNICAL EDUCATION EXAMINATION FEES.
ELIGIBILITY
- A pass in Class X or its equivalent examination with 35% in each of the subjects with Science and Mathematics.
- The student must have studied English as one of the subjects in Class 10.
- Non-Karnataka students should obtain Eligibility Certificate issued by the Department of Technical Education, Govt. of Karnataka
- Karnataka students who have passed class X in ICSE or CBSE should obtain Eligibility Certificate issued by the Department of Technical Education, Government of Karnataka.
ADMISSION PROCEDURE
Application in the prescribed form for admission should reach the admission office within the date prescribed by the Directorate of Technical Education, accompanied by the following:
1. Original + 2 Xerox copies of 10th standard Marks Card
2. Original Transfer Certificate + 2 photo copies.
3. Five Years’ Study Certificate + 2 photo copies .in case of Karnataka Students
4. Eligibility Certificate in case of all Non-Karnataka Students
5. Eligibility Certificate only in case of Karnataka students who have passed CBSE or ICSE examinations.
6. Latest photographs - 05 Nos.
They must have obtained the “ELIGIBILITY CERIFICATE” before seeking admission, by applying to the SECRETORY BOARD OF TECHNICAL EDUCATION, III floor Directorate of Technical Education Building, Palace Road, Bangalore-560001.
Enclosing following documents. Our institution will assist them in procuring the eligibility certificate.
1. ORIGINAL marks card of qualifying examination (equivalent to the S.S.L.C. examination Karnataka) should be produced.
2. The amount of Rs. 500/- should be remitted in treasury under the head of account 0202,EDUACATION SPORTS ARTS & CULTURE, 02 TECHNICAL EDUCATION INSTITUTE AND OTHER FEES, 01 BOARD OF TECHNICAL EDUCATION EXAMINATION FEES.
CAREER PROSPECT
Students taking up polytechnic diploma engineering courses do have a lot of opportunities available in the present job scenario. Most of the companies offer good pay packages for the deserving candidates. There are plenty of freshets’ jobs for polytechnic diploma holders available in the engineering Companies.
Directorate of Technical Education Govt. of Karnataka, Karnataka
Primary Functions of the Directorate
Technical Education Quality Improvement Programme (TEQIP)
ACADEMIC
EXAM SECTION
Students taking up polytechnic diploma engineering courses do have a lot of opportunities available in the present job scenario. Most of the companies offer good pay packages for the deserving candidates. There are plenty of freshets’ jobs for polytechnic diploma holders available in the engineering Companies.
Directorate of Technical Education Govt. of Karnataka, Karnataka
Primary Functions of the Directorate
- To administer, supervise, control and plan programs for the development of Technical Educational Institutions in the state both at Degree and Diploma levels.
- To formulate Engineering studies and courses, recognition of new courses to examine and recommend for starting of New Institutions in the State both at the Degree levels and Diploma level.
- To conduct inspections and periodical reviews of existing Technical Educational Institutions to maintain the standard of Education.
- To conduct the diploma public examinations and to award the Diploma certificates to successful candidates.
- To sanction academic approval for Govt. and Aided Institutions.
- To provide suitable norms and procedures for selection of students for admission of students to Polytechnics.
- To release grants and other facilities to aided institutions.
- To select and depute teaching faculty for higher education
Technical Education Quality Improvement Programme (TEQIP)
ACADEMIC
- Monitoring project progress in the state.
- Facilitate the Project Institutions for Faculty Development Programmes..
- Accord approvals for conduct of Workshops/State level/ National Level Seminor in Project Institutions.
- Conduct Workshops/Training Programmes/Conferences for TEQIP Institutions.
- Facilitate Networking of Institutions
- Facilitate Mentoring of Institutions through Mentors.
- Conduct of Performance Audit for the Project Institutions through Performance Auditors
- Liason between NPIU and project Institutions
EXAM SECTION
- Conduct of examination of all Polytechnics of the State (Annual & Semester scheme)
- Printing of Question papers & Answer booklets for all Govt., Aided / Private Polytechnic students.
- Allotting staff for conduction and supervising the Exams
- Evaluation of answer booklets.
- Award certificates, marks card etc.
- Announcement of results as per academic calender.
- Admission approval and affiliation of polytechnic students.
- Introducing coding and de-coding system for evaluation to maintain confidentiality.
- Re-addressal of grievances of students.
- Transparency in the evaluation system.
- Squad supervisions at the time of examination.
Total Institutions
Govt.Polytechnic Aided Polytechnic Private Polytechnic Total
81 43 167 291
Diploma Courses in Engineering
AGRICULTURE ENGINEERING
AERONAUTICAL ENGINEERING
ARCHITECTURE
AUTOMOBILE ENGINEERING
BIO-TECHNOLOGY
CIVIL (DRAUGHTSMANSHIP)
CIVIL ENGINEERING(GENERAL)
CHEMICAL ENGINEERING
CERAMIC TECHNOLOGY
COMPUTER SCIENCE & ENGG
ELECTRONICS & COMMUNICATION ENGG
ELECTRICAL & ELECTRONICS ENGG
CIVIL (ENVIRONMENTAL)
ELECTRONICS & COMMUNICATION ENGG
APPAREL DESIGN & FABRICATION
HEAT POWER TECHNOLOGY
INTERIOR DESIGN
ELECTRONICS INSTRUMENTATION & CONTROL
INTERIOR DECORATION
INFORMATION SCIENCE & TECHNOLOGY
JEWELLERY DESIGN
LIBRARY SCIENCE & INFORMATION MANAGEMENT
LEATHER TECHNOLOGY
MECHATRONICS
MECHATRONICS ENGINEERING
MECHANICAL ENGG. (GENERAL)
MECHANICAL ENGG. (INSTRUMENTATION)
MINING ENGINEERING.
MECHANICAL ENGINEERING
METALLURGICAL ENGG.
MACHINE TOOL TECHNOLOGY
CIVIL ENGINEERING
PLASTIC TECHNOLOGY
POLYMER TECHNOLOGY
PRINTING TECHNOLOGY
SOUND & RECORDING ENGG.
TEXTILE TECHNOLOGY
WATER TECHNOLOGY & HEALTH SCIENCES
CONSTRUCTION TECHNOLOGY
HEAT POWER ENGG, & FABRICATION
POLYMER TECHNOLOGY (RUBBER)
Govt.Polytechnic Aided Polytechnic Private Polytechnic Total
81 43 167 291
Diploma Courses in Engineering
AGRICULTURE ENGINEERING
AERONAUTICAL ENGINEERING
ARCHITECTURE
AUTOMOBILE ENGINEERING
BIO-TECHNOLOGY
CIVIL (DRAUGHTSMANSHIP)
CIVIL ENGINEERING(GENERAL)
CHEMICAL ENGINEERING
CERAMIC TECHNOLOGY
COMPUTER SCIENCE & ENGG
ELECTRONICS & COMMUNICATION ENGG
ELECTRICAL & ELECTRONICS ENGG
CIVIL (ENVIRONMENTAL)
ELECTRONICS & COMMUNICATION ENGG
APPAREL DESIGN & FABRICATION
HEAT POWER TECHNOLOGY
INTERIOR DESIGN
ELECTRONICS INSTRUMENTATION & CONTROL
INTERIOR DECORATION
INFORMATION SCIENCE & TECHNOLOGY
JEWELLERY DESIGN
LIBRARY SCIENCE & INFORMATION MANAGEMENT
LEATHER TECHNOLOGY
MECHATRONICS
MECHATRONICS ENGINEERING
MECHANICAL ENGG. (GENERAL)
MECHANICAL ENGG. (INSTRUMENTATION)
MINING ENGINEERING.
MECHANICAL ENGINEERING
METALLURGICAL ENGG.
MACHINE TOOL TECHNOLOGY
CIVIL ENGINEERING
PLASTIC TECHNOLOGY
POLYMER TECHNOLOGY
PRINTING TECHNOLOGY
SOUND & RECORDING ENGG.
TEXTILE TECHNOLOGY
WATER TECHNOLOGY & HEALTH SCIENCES
CONSTRUCTION TECHNOLOGY
HEAT POWER ENGG, & FABRICATION
POLYMER TECHNOLOGY (RUBBER)
Admission Helpline: 9945432377 / 9331264455
